The Correct Operation Of The Trailer

- Aug 04, 2017 -

1. Locate the trailer hook at the rear of the tractor and the trailer in front of the trailer. Many car trailer hooks are designed in the lower part of the bumper, usually in the vehicle manual marked in a clear position, the owner can also be observed before and after the bumper hidden hidden space, where the use of circular or square cover Location is the location of the car trailer hook.

2. Some car trailer hooks are split and need to be assembled when used. After removing the cover on the bumper, assemble the truck to carry the hook.

p201706021017137121270.jpg

3. Install the trailer tool. Whether it is the use of soft or hard trailer tool, the installation must ensure that the connection when the car hook firmly and reliably, the design of the hook on the safety lock need to lock in place. Check the front and rear connections again before the trailer travels. The three sides do not install the towel of the soft trailer rope in the use of bundled knot, if the death knot after a great traction pull will make the trailer rope is difficult to unlock.

4. Tractor starting with a block to ensure that the big torque to provide adequate traction, while the tractor needs to control the speed, to maintain a smooth driving, when a slight resistance to increase the power output. Manual transmission models to avoid Meng Meng clutch pedal, the use of semi-linked slowly start, so as not to cause damage to the car.


Related Products